CORE CAT6 Easy-RJ45 Pass-Through Connector, 50µ Gold Plated, Bag of 100
- CAT6 Unshielded U/UTP Easy-RJ45 Pass-Through Connector
- Easy-RJ45: Push the cable into the connector so that the wire conductors come out the front, then crimp and cut.
- No Load Bar, Staggered Up/Down: line the wire conductors then push the cable in and the connector will automatically move the wire conductors up/down in the pre-defined order.
- 50µ Gold Plated 3-Prong Pins
- Bag of 100 units
Overview
Easy, Pass-Through
Make crimping RJ45's easier by inserting the wire conductors through the connector and out the front. This allows you to easily verify the correct colour sequence for TIA 568A or 568B. The connector allows a push-pull method to seat the cable jacket as far into the connector as possible.
50μ 24k Gold Plated
The thicker the gold plating, the better the electrical conductivity and signal integrity whilst also enhancing corrosion resistance which is important to retain conductivity over time. Furthermore, CORE's 50-micron 24k gold plated contact pins comply with IEC 60603-7.
3-Prong Pins
Some manufacturers use 2-Prong Pins. CORE's 3-Prong Pin design has a large surface area with 3 points of contact on the cable's copper wire conductor. The larger contact area with the copper wire conductor decreases crosstalk whilst providing better electrical conductivity and signal integrity. Furthermore, 3 pins allow a stable and stronger hold compared to 2 pins.
2-Rows, Improved Crosstalk Performance
By allowing the cable to be inserted further into the plug, this reduces the length of untwisted wires which minimizes near-end crosstalk (NEXT). Furthermore, the CAT6 RJ45 two-row up/down staggered design minimizes Equal-Level Far-End Crosstalk (ELFEXT), thereby improving cable performance. This has the same performance as a Load Bar without all the hassle. Just push into the RJ45 plug and it will automatically separate the wire conductors up/down.
High-density Polycarbonate
Featuring a low coefficient of thermal expansion (CTE), the Polycarbonate RJ45 housing provides excellent stability and rigidity for use in extreme temperature environments whilst boasting a long service life.
PoE Compatible
Compatible with IEEE 802.3af/at/bt (PoE/PoE+/PoE++), the 50-micron 24k gold plating along with the 3-Prong Pin design ensure lower resistance and less heat.
Specifications
Wire Conductor | 23AWG (CAT6) |
Max. Cable Overall Diameter
| 4.5 to 6.0 mm |
Contact Plating
| 50μ 24k Gold Plated over 100μ Nickel Plating. Exceeds ANSI/TIA-1096-A. |
Contact Type | 3-Prong Pin |
Contact Resistance | 20mΩ Max. |
Conductor Type | Solid & Stranded |
Housing Material | Polycarbonate |
Flame Autoextinguish | IEC 60695-11-10 |
Compliance | ANSI/TIA 568-D.2, ISO/IEC 11801 Class D, ANSI/TIA 1096-A, IEC 60603-7 |
PoE Compliance | IEEE 802.3af/at/bt (PoE/PoE+/PoE++)
|
Insertion/Extraction Life |
2000+ Cycles |
Operating Temperature |
-40ºC to +0ºC8 |
Qty:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30