CORE CAT7A Toolless Shielded Field Termination RJ45 Connector, 50µ Gold Plated, 1 Unit

50μ 24k Gold Plated

The thicker the gold plating, the better the electrical conductivity and signal integrity whilst also enhancing corrosion resistance which is important to retain conductivity over time. Furthermore, CORE's 50-micron 24k gold plated phosphor bronze contact pins comply with IEC 60603-7.

3-Prong Pins

Some manufacturers use 2-Prong Pins. CORE's 3-Prong Pin design has a large surface area with 3 points of contact on the cable's copper wire conductor. The larger contact area with the copper wire conductor decreases crosstalk whilst providing better electrical conductivity and signal integrity. Furthermore, 3 pins allow a stable and stronger hold compared to 2 pins.

2-Rows, Improved Crosstalk Performance

By allowing the cable to be inserted further into the plug, this reduces the length of untwisted wires which minimizes near-end crosstalk (NEXT). Furthermore, the RJ45 two-row up/down staggered load bar design minimizes Equal-Level Far-End Crosstalk (ELFEXT), thereby improving cable performance.

Toolless Crimping

After placing the loading bar into the RJ45 connector, close the top of the casing to automatically crimp the cable.

Fully Shielded

Encased in a fully shielded die-cast zinc alloy, nickel plated body to protect against EMI and RF interference as well as crosstalk from nearby cables.

Built-in Boot

The shallow-depth, built-in strain relief secures the connector and aids with bending the cable.

PoE Compatible

Compatible with IEEE 802.3af/at/bt (PoE/PoE+/PoE++), the 50-micron 24k gold plating along with the 3-Prong Pin design ensure lower resistance and less heat.