CORE CAT6 Easy-RJ45 Pass-Through Connector, 50µ Gold Plated, Bag of 100

Easy, Pass-Through

Make crimping RJ45's easier by inserting the wire conductors through the connector and out the front. This allows you to easily verify the correct colour sequence for TIA 568A or 568B. The connector allows a push-pull method to seat the cable jacket as far into the connector as possible.

50μ 24k Gold Plated

The thicker the gold plating, the better the electrical conductivity and signal integrity whilst also enhancing corrosion resistance which is important to retain conductivity over time. Furthermore, CORE's 50-micron 24k gold plated contact pins comply with IEC 60603-7.

3-Prong Pins

Some manufacturers use 2-Prong Pins. CORE's 3-Prong Pin design has a large surface area with 3 points of contact on the cable's copper wire conductor. The larger contact area with the copper wire conductor decreases crosstalk whilst providing better electrical conductivity and signal integrity. Furthermore, 3 pins allow a stable and stronger hold compared to 2 pins.

2-Rows, Improved Crosstalk Performance

By allowing the cable to be inserted further into the plug, this reduces the length of untwisted wires which minimizes near-end crosstalk (NEXT). Furthermore, the CAT6 RJ45 two-row up/down staggered design minimizes Equal-Level Far-End Crosstalk (ELFEXT), thereby improving cable performance. This has the same performance as a Load Bar without all the hassle. Just push into the RJ45 plug and it will automatically separate the wire conductors up/down.

High-density Polycarbonate

Featuring a low coefficient of thermal expansion (CTE), the Polycarbonate RJ45 housing provides excellent stability and rigidity for use in extreme temperature environments whilst boasting a long service life.

PoE Compatible

Compatible with IEEE 802.3af/at/bt (PoE/PoE+/PoE++), the 50-micron 24k gold plating along with the 3-Prong Pin design ensure lower resistance and less heat.